četrtek, 8. februar 2018

# 3. Step by Step Tutorial Mixed Media Altered Masquerade Mask / Pustna maska

You need:

- black gesso
- white gesso
- tiny stones - sand
- Lindy's spray
- Lindy's Magical powder
- different chipboards
- embossing stamp pad
- embossing powder
- paper flowers
- heat tool 

Potrebujemo:

- črni gesso
- beli geso
- drobni kamen - pesek
- Lindy's sprej
-Lindy's Magical prahce
- različne laserske izrezke
-embosirno gobico
-embosirni prah
- papirnate rožice
-grelnik - fen


Step 1
The mask is on both sides painted with a black gesso.

1. korak
Masko na obeh straneh pobarvamo z črnim gessom. 


Step 2
While the dye is dried, prepare a mixture: a few teaspoons of black gesso and fine stones are mixed well.

2. korak
Medtem ko se barva suši, si pripravimo mešanico: nekaj žličk črnega gessa in drobnega kamna, ki ju dobro zmešamo.


Step 3
Apply a mixture to the outside of the mask with a brush.

3. korak
Na zunanjo stran maske z čopičem nanašamo mešanico.


Step 4
When the color is dried, the white gesso is slightly applied to the mask. This is so that sprays and dusts are well observed. If you want, you can omit the white gesso and you will get a different color effect.

4. korak
Ko se barva posuši, na masko rahlo nanesemo še beli gesso. To pa zato, da se bodo spreji in prahci lepo opazili. Če želite, lahko beli gesso izpustite in tako boste, dobili različen efekt barve. 


Step 5
How do we use Magical Powders? There are two steps:
a) spray the desired surface with water and then add powder(s) or
b) apply some powder to the desired surface (apply with a brush or spoon) and then spray with water
I use both steps. I also used Lindy's spray, which can be diluted with water if desired. At the end of the paint dry with a heat tool.

5. korak
Kako uporabimo Magical prahce? Lahko na dva načina:
a) da željeno površino naprej poškropite z vodo in nato dodate prahec / prahce ali
b) da na željeno površino naprej nanesete nekaj prahca (nanašate lahko z čopičem ali žličko) in nato poškropite z vodo
Jaz uporabljam oba načina. Uporabila sem tudi Lindy's sprej, ki ga lahko po želji redčite z vodo. Na koncu barve posušimo še z grelnikom. 


Step 6
When the color is dry, add some chipbords, which you can colouring with Magical powder or emboss them. I embossed the inscription "Let's do a little Magic" and the others chipboards painted with Magical powder.

6. korak
Ko je barva suha, dodamo še nekaj chipbordov, ki jih lahko po želji pobavate z Magical prahci ali pa jih embosirate. Jaz sem napis embosirala, ostale pa sem pobarvala z prahci.

1 komentar: